Kit Contents

Pitts Special

This kit is absolutely complete, all that is needed to complete the airframe is adhesives and covering. The kit contains:

  • Lightweight Epoxy/glass motor cowl with white gelcoat.
  • Epoxy/glass cockpit covering with white gelcoat.
  • Epoxy/glass wheel spats with white gelcoat.
  • Vacuum formed canopy and Styrene parts.
  • Landing gear legs, preformed and silver soldered together.
  • Die-stamped steel fixings.
  • Tailwheel with flat spring blades.
  • Preformed wire cabanes.
  • CNC cut ribs, formers and fuselage sides.
  • Many other wood parts sanded and milled to shape.
  • Spindle moulded aileron LE
  • All strip wood individually selected.
  • Pneumatic wheels, including tailwheel.
  • Tank with special clunk filter.
  • All screws, nuts and washers.
  • All ball joints, control wire, rudder horns and hinges.
  • Ball joint screw driver for the M3 socket screws. The model takes about five minutes to assemble on the flying field.
  • Two large sheets of Mylar transfers.
  • Aluminum sheet.
  • Very detailed full-size plans.
  • Detailed instructions and parts list.

All wire parts are ready silver soldered together! For covering the Pitts we recommend one 5 m roll of ProfiCover.