|
| Over the last few years the ever rising price of the Japanese Yen forced us to regularly raise the prices of the Titan ZG engines. Beginning this year came the long awaited turning point and for the first time we can reduce the price a little. |
Let us all hope the Yen exchange rate will For a introduction to the Quality Control of our Titan ZG model aircraft engines, as apposed to the normal Zenoah engines, please click here. |
 |
| PROFICOVER is very easy to use, it is a woven Polyester fabric that is extremely tear resistant and temperature stable. Due to the very effective adhesive coating the airframe does not need any form of coating as is the case with other covering materials. |  |
 |
|
|
|
|
PROFICOVER shrinks equally in both directions of the weave. The shrinkage can be controlled precisely by varying the irons temperature. The most difficult of areas can be easily covered without a single crease or fold. PROFICOVER is very easy to iron on, as trapped air bubbles can dissipate through the material and the untreated wood. Rounded wing tips are a cinch. One heats the PROFICOVER with the iron and then it is possible to pull it into any shape, very similar to glass cloth. A heat gun is not necessary as the iron will not scratch the material. A PROFICOVER covered model will not suffer warps or air bubbles when you take care with ironing the material. PROFICOVER imparts enough stiffness without shrinking too much. This considerably reduces the drum effect in the interest of sound reduction. |
|
PROFICOVER can be coated practically with every type of paint, providing the paint has a certain amount of flexibility. Two-component car paint (Acryl or Polyurethane) with a plasticiser agent added is absolutely ideal for the purpose. Single component Alkyd resin based paints can also be used. For vintage models Clou dope is ideal. Do not use any form of filler coat or similar with any type of paint as these materials become very hard and develop cracks and particles break off. PROFICOVER is white transparent. 1 m ...... #0500 € 16,95 |
Perma-Grit® Flexi Strips, new sizes: |
 |
Flexible tungsten carbide grit coated thin sheet steel. Thin enough to be bent to any shape, internal or external. Cut with old scissors. Can be glued with double sided tape or epoxy. Allows sanding of any type of shrouding of control surfaces. Use is limited only by your fanatasy. Size 140 x 50 mm: Size 280 x 50 mm: Size 280 x 115 mm: |
|
 |
Perma-Grit® Sanding Block 45° |
 |
|
| This new Perma-Grit® sanding block has both ends cut to 45°, this enables you to reach into the most difficult of corners. |
| Sanding Block 45°, size 140 mm x 50 mm | #3315 | EUR 20,47 |
| Perma-Grit® Sanding Block with square ends: | ||
| Sanding Block, size 140 mm x 50 mm | #3314 | EUR 20,47 |
| Sanding Block, size 280 mm x 50 mm | #3328 | EUR 34,57 |
| Sanding Block, size 560 mm x 50 mm | #3356 | EUR 50,78 |
| Sanding Block, size 840 mm x 50 mm | #3384 | EUR 71,76 |
| All prices in EURO including 19% German VAT. We reserve the right to alter prices and specifications without prior notice. July 1st 2008. |
|
©2008 toni-clark.com - Toni Clark practical
scale GmbH, Zeiss Str. 10, D-32312 Luebbecke, Germany, Tel. (0049) 05741 5035 Fax. 40338
e-mail in Deutsch: Reinsch@toni-clark.com e-mail in English: Clark@toni-clark.com All rights reserved. No reproduction in any form without our written permission. |