Intake Trumpet DA 50

This is the same as the intake trumpet #0081, but including a pair of M5x60 socket screws.

Apply only a minimum of Loctite to the screws, Loctite must on no account enter the crankcase. Only tighten very lightly. What appears to be a simple rubber gasket holds down the flutter valves and must not be squashed unduly.

Intake Trumpet ................ #5581 € 10,50

Longer Standoff Mounts for the DA-50R

Standard with the DA 50-R is a set of 63,5 mm long standoff mounts.

There are longer standoff mounts available with a lenght of 3" or 76 mm.

Standoff Mount 76 mm, per 1 ... #5538  € 9,50
4 are required!

... and of course there are also shorter stand off mounts available that are 1 1/4 " = 32 mm long.

Standoff Mount 32 mm, per 1 ... #5539  € 7,95
4 are required!