SPECIFICATION:
Capacity: 50 ccm
Bore: 42,6 mm
Stroke: 35 mm

Power: 3,7 kW / 5 PS
Weight: 1330 g
with Ignition: 1470 g
Menz S Propeller:
   2-Blade:

22x10, 22x12,
23x10, 24x8

   3-Blade: 20x10, 20x12,
22x10 narrow
Walbro Carburettor with Choke
Fuel: 1:50
BEL RAY H1R / high octane gas

DA50R #5500 EUR 569,-
complete with ignition.
We reserve the right to alter price and spec. without prior notice.


  • Low weight and high power due to unbelievably compact crankcase.
  • Each crankcase CNC machined from aircraft quality aluminium alloy.
  • Long conrod with piston pin located very near to piston crown, considerably reducing side loads.
  • Rear intake with 4 leaf flutter valves.
  • Ideal for Hydro Mount System as engine lays well to the fore.
  • Unusually low vibration due to computer simulation aided design.
  • Rapid spares delivery and repairs service from Toni Clark practical scale, Germany.


Full-size 3-view drawing 
PDF-file   31 KB.

With the original drawing on your monitor, you can zoom up any detail or print out the drawing. But for this you must have the Adobe Acrobat Reader installed in your system. This program can be downloaded free of charge:


The DA 50-R is a high performance computer designed model aircraft engine. The first glance imparts a very strong impression of the high quality machining. All components, without exception, have been designed by DA without compromise, and are made by specialist firms exclusively for this DA engine.


The crankcase is unbelievably compact and very light, only possible due to the single counter balance weight on the crankshaft. .  

Each crankcase is CNC machined from the solid, using aircraft alloy 7075-T6. In comparison to die casting, a very costly process in time and material. A system that moreover has the advantage of a perfect fit and an absolute correct alignment of the main bearings, plus extreme rigidity and strength. All very decisive requirements for an extremely high performance engine with very close tolerances throughout.


Rear view of the DA 50-R.
The standoff mounts are supplied with the engine.
Please click on the pictures for enlargement.

The long aluminium alloy conrod plus the gudgeon pin being mounted close to the piston crown allows the high torque to be transferred without undue sideloads. This all reduces friction and wear while ensuring maximum power. The very low crankcase volume plus the intake flutter valves is the reason for this engines high performance.

The DA 50-R when fitted with a custom designed silencer system will produce power equivalent to any 60cc engine or even more..



The piston, conrod and crankshaft has been designed with a computer simulation programme. These parts are perfectly balanced and harmonized to each other. In spite of only one crankshaft balance weight the vibration levels are extremely low. The engine mountings reach quite a way forward making this an ideal engine to fit our Hydro-Mount-System.

Due to it’s very neat and gleaming exterior it seems a pity to hide this engine under the cowl.

DA 50-R with battery ignition #5500  EUR 569,-


All prices in EURO including 19% German VAT. We reserve the right to alter prices and specifications without prior notice. November 16th 2008.


Home
Silencers and Headers
Original DA Muffler

Original DA Fuel Dot
Carb Intake Trumpet
76mm Standoff Mounts

Spares
DA 100L
DA 150

 

©2008 toni-clark.com - Toni Clark practical scale GmbH, Zeiss Str. 10, D-32312 Luebbecke, Germany, Tel. (0049) 05741 5035 Fax. 40338
  e-mail in Deutsch: Reinsch@toni-clark.com
e-mail in English: Clark@toni-clark.com
All rights reserved. No reproduction in any form without our written permission.