CAP 21 kit

• Ribs, formers and other shaped parts are either CNC milled with a high frequency spindle running at 60,000 rpm or profile belt sanded to shape. There is no ragged die stamping with our kits, or the charred edges from a laser cutter.
  
  
• We carefully select all Balsa and timber at the log and finished stage. Paired parts are matched for weight and hardness.
  
  
• Before we commence production the prototype is exhaustively tested.
  
  
• Our kits are really complete, spinners, tanks wheels, control linkages and so on, you need only glue and covering material.
  
  
• We use not only standard self tapping screws but expensive Allen machine screws with safety nuts where we consider these to be necessary.
  
  
• You can of course ring us when you come up against a problem which is causing you difficulty. Tel. (0049) 5741 5035