CAP 21 Kit contents.

Everything you need is in the kit right down to the last screw except covering materials and glue:

• Lightweight Epoxy/glass motor cowl with white gelcoat.
  
  
• Scale spinner with epoxy/glass cone with white gelcoat and Delrin backplate.
  
  
• Lightweight Epoxy/glass wing root fairings.
  
  
• Lightweight Epoxy/glass tailplane centre section fairing with white gelcoat.
  
  
• Epoxy/glass wheel spats with white gelcoat.
  
  
• Vacuum formed leading edges for rudder and the elevators and pushrod fairings.
  
  
• Cockpit Canopy, toned smoke gray.
  
  
• Preformed Dural landing gear.
  
  
• Tailwheel with flat spring blade.
  
  
• Pneumatic wheels, including tailwheel.
  
  
• CNC-cut ribs.
  
  
• Two firewalls: One ready CNC-machined and drilled for our Hydro Mount System and for other engines a plain firewall without any holes or cutouts.
  
  
• Many other wood parts sanded and milled to shape.
  
  
• Spindle moulded ailerons with matching wing trailing edges.
  
  
• Spindle moulded fuselage corner strips.
  
  
• All balsa for sheeting and stripwood individually selected.
  
  
• Tank with special clunk filter.
  
  
• All screws, nuts and washers.
  
  
• All ball joints, Robart dowel hinges, control wire and rudder horns.
  
  
• Large sheet of Mylar transfers.
  
  
• Very detailed full-size plans.
  
  
• Detailed instructions and parts list.
  
  
• Scale Documentation CAP 21 No.001 F-WZCH
  
  
• No silver soldering required!