 |
 |
|
|
| CAP 21 with Titan ZG 62SL and Hydro-Mount-System: | ||
| This engine combination gives fantastic power to weight ratio as well as the minimum sound level. Ideal for performing almost unreal aerobatics! | ||
|
CAP 21 complete kit.
|
#6000
|
EUR 739,-
|
|
Titan ZG 62SL.
|
#6500
|
EUR 389,-
|
| Optional: Easy Start System |
#7777
|
EUR 99,90
|
| Alternatively: Titan ZG 62PCI, with the PCI 1.3 microprocessor controlled battery ignition system. It should be the version with the very neat Zenoah rubber spark plug caps, because this spark plug connector will better fit under the cowling. |
#6594
|
EUR 479,00
|
|
Hydro-Mount-System CAP 21.
|
#6706 |
EUR 149,90
|
|
Stainless steel silencer for ZG 62 and HMS-CAP 21
|
#6660
|
EUR 136,90
|
|
Carburettor intake bend ZG 62 from cast aluminium, special
version for the CAP 21 HMS. *
|
#6586
|
EUR 39,95
|
|
Carburettor insulating block, 2 mm thick.
|
#6552
|
EUR 5,50
|
|
Carburettor gasket ZG 62, needed
for the intake bend.
|
#6504
|
EUR 1,80
|
|
Intake tube with flange.
|
#0081
|
EUR 9,95
|
|
TYGON fuel tubing, 1m.
|
#0090
|
EUR 4,40
|
|
Super Silence 3-Blade prop 21x12"
|
#9971
|
EUR 77,46
|
|
Over all the best prop for the CAP 21, noticeable
louder but lots of static thrust: |
#9934
|
EUR 62,37
|
|
CLOU Clear Dope, 1000 ml.
|
#0590
|
EUR 21,90
|
|
Airbubble cushion plastic sleeves for wings and tail.
|
#6490
|
EUR 37,90
|
|
* A tip for the mechanical minded: Unfortunately it is not possible to manufacture the special cast aluminium bend designed for our CAP 21 Hydro-Mount-System so that it performs as good as the bend you can make from the copper water pipe bend and the two respective flanges. Should you have no fears when it comes to silver soldering, you should better make your own bend using the drawing supplied with the CAP 21 Hydro-Mount-System. With the copper bend you will be able to get a lower tickover speed, which is a worthwhile reward for your handwork, especially with our very light weight CAP 21: | ||
|
Carburettor to cylinder flange ZG 62
|
#6577 |
EUR 4,95
|
|
Copper bend and brass tube
|
#6578 |
EUR 1,95
|
|
Carburettor flange ZG 62
|
#6579 |
EUR 4,95
|
| All prices in EURO including 19% German VAT. We reserve the right to alter prices and specifications without prior notice. November 16th 2008. |
|
©2008 www.toni-clark.com - Toni Clark
practical scale GmbH, Zeiss Str. 10, D-32312 Luebbecke, Germany, Tel. (0049) 05741 5035 Fax. 40338
e-mail in Deutsch: Reinsch@toni-clark.com e-mail in English: Clark@toni-clark.com All rights reserved. No reproduction in any form without our written permission. |